MenuTable Type Boring and Milling MachineUnion Chemnitz KCUX 130 CNC 840 D
Description
The Table Type Horizontal Boring and Milling Machine has been mechanic overhauled 2017.
further details:
- Work table with pallet change system (automatic tool change) Standard pallet changer with 2 stations in z- direction, exchange of work pieces (max. 6,5t) during operation cycle
- unload and loading station for two pallets size each 1600x2000mm
- controlled face chuck diameter 700mm (Interpolation with other axes possible)
- coolant device make Bürener
- swarf conveyor
Details
boring spindle diameter130mm
y-axis2500mm
z-axis1500mm
x-axis3200mm
b-axis360°
w-axis750mm
U-axis220mm
tool taperSK 50
turning speed range - spindle5-3000U/min
turning speeds2,5-280 PlansupportU/min
feed speedsZ/Y/W , 1....6.000mm/min
rapid speedZ/Y/W , 15m/min
max. torque on the spindle2415Nm
weight of tools max.25kg
control Siemens 840 D
tool piece magazine with 60/place
clamping table1600x2000mm
table load6,5t
coolantIKZ / CTS
dimension machine LxWxH5,0x6,0x4,45m
dimensions electric cabinet LxWxH2,0x0,68x2,3m
total power requirement51kW
weight of the machine ca.32t
Work performed
5-AXIS Machining CENTRE HORIZONTAL / Domestic Warranty 6 months!
The table boring machine has been mechanically overhauled.
Further details:
- Tool holding intake boring spindle taper hollow shank HSK-A 100
- Tool holder face support taper hollow shank HSK-C 100
- Work table with pallet changing system (automatic workpiece change) Standard pallet change with 2 stations in z-axis direction.
- Exchange of workpieces (max. 6.5to) in the machining work cycle.
- Loading and unloading station for 2 pallets size each 1600x2000mm
- controlled cross slide Ø=700mm (interpolation with other axes possible)
- Cooling device brand Bürener
- Chip conveyor
work carried out:
- Overhaul of the complete headstock
- W-axis optimized for better lifetime / wear resistance (sleeve with ceramic coating)
- Renewal of the linear guides of x-, w-, z- and y-axis
- Headstock overhauled by manufacturer.
- Assembly, reconditioning and reassembly of the facing slide
- Renewal of all hydraulic hoses according to DIN 20 066
- Renewal of the lubrication pipes
- Renewal of the central lubrication unit of the X-axis
- Dismantling of the clamping shoes of the X and Y axis, cleaning, renewing of linings
- Seals of hydraulic components renewed
- guideway covers refurbished and wiper lips renewed
- Chip conveyor cleaned, checked, defective bearings replaced
- Pallets cleaned, checked, defective rollers replaced
- Cleaning, inspection, painting of the coolant system
- Tool changer checked, and partly overhauled by the manufacturer
- Complete repainting of the machine